Samstag, 10. August 2013

Iphone 5 Luminescent glowing apple Logo Homebutton Pimp up your iphone

 
ORDERS AND BUSINESS INQUIRIES CHECK OUR WEBSITE OR SEND US A EMAIL


Iphone 5 Glowing Apple Logo Homebutton from 6.5USD

 The Luminecent Apple logo in your homebutton will switch off 15seconds after the standby mode of your Iphone

 
IPHONE 5 MIRRORED LCDS
 
 



available for Iphone 5

Available LED Panel Colors – White, Blue, Pink, Green

  • Step 1. Remove the 2 Screws from the bottom of your Iphone 5

  • Step 2. Remove the LCD with the Sucker  carefully use the plastic tool to lift up the Display

  • Step 3. Remove 3 Screws and gently pull up the connector Shield

  • Step 4. Pop up the 3 LCD Connectors

  • Step 5. Cut a Slice of the 3m Tape and cover the downside of the Chip as shown in the video, let the connector of the chip upside free to connect later the flexcable

  • Step 6. Remove the middle screw of the Battery connector shield

  • Step 7. Gently push the LED panel pcba behind the Iphone Battery

  • Step 8. Add the flexwire screwhole and attach the 1 screw of the Battery connector again

  • Step 9. Cut another pcs of tape to paste the flexwire on the motherboard then slide the flexcable carfully up till it paste on the upside of the chip  see video

  • Step 10. Add back your connectors of the LCD

  • Step 11. Remove one srew of the Homebutton  remove the old Homebutton , Add the New Homebutton …

  • Step 12. Carfully slide the LE D Lum. Panel under the shield and over the Homebutton

  • Step 13. After you fix it well ..(use a little Tape again) and place back the Screws

  • Step 14. Pull down your LCD and fix back your 2 screws  for the LCD



For orders please contact us via email or buy directly in our shop

3 Kommentare: